Water · Dirt · Diesel bug · Perth metro · 24/7

Contaminated fuel in the tank?
We drain it on-site.

Water, dirt, sediment, microbial growth ("diesel bug"), stale fuel — Ben removes the contamination, flushes the lines, replaces the filter if needed, and refuels you with clean fuel. 45 to 90 minutes on-site.

Call Ben Now — 0416 692 022

5.0 stars · 33 Google Reviews · No Fix, No Fee

Response

35–60 min

Time on-site

45–90 min

Typical price

$150–$350

Guarantee

No Fix, No Fee

Common contamination types

Water in the tank

Bad batch at the servo, condensation in a half-full tank, leaky fuel cap. Causes misfires + corrosion.

Dirt + sediment

Tank rust, dodgy fuel source, old vehicle with deteriorated tank. Clogs filters and injectors.

Diesel bug

Microbial growth at the fuel-water interface in long-stored diesel. Black sludge that clogs everything.

Stale fuel

Fuel that has sat 6+ months in a vehicle that hasn't run. Loses combustibility, gums up the system.

Symptoms to watch for

  • Engine misfires or runs rough, especially after a recent fill-up
  • Hard starting or no start at all
  • Hesitation, stalling, or loss of power
  • White, black, or excessive smoke from the exhaust
  • Check engine light on
  • Fuel that looks cloudy, milky, or has visible particles

Questions about contaminated fuel

What counts as contaminated fuel? +

Water in the tank (from condensation, a leaky cap, or a bad batch at the pump), dirt or sediment from a dodgy fuel source, biological growth in long-stored diesel ("diesel bug"), or fuel that has degraded over months in a vehicle that has not been run. Any of these cause running problems and engine damage if driven.

How do I know my fuel is contaminated? +

Common signs: engine misfires or runs rough, hesitation or stalling, hard starting, smoke from the exhaust, check engine light, or visible water/dirt in the fuel when drawn from the tank. If you have just refuelled and the car starts behaving badly, contamination is a strong suspect.

Can I add a fuel additive to fix it? +

Additives can help with very mild water contamination but they will not fix a tank with significant water, dirt, or microbial growth. If you have actual contamination, the fuel needs to come out and the system needs flushing. Additives are a prevention tool, not a rescue tool.

What does a contaminated fuel drain cost in Perth? +

Most jobs are $150 to $350. Same band as wrong-fuel jobs because the process is similar — drain, flush, replace filter, refuel. $$ is the typical range. Ben confirms before we start.

Will my engine be OK? +

If we catch it before significant driving on the contaminated fuel — yes, no permanent damage. The further you have driven, the more the contamination has been through the high-pressure pump and injectors. Worst case, those need workshop attention afterwards, but it is rare.

Think your fuel is bad?

Tell Ben what you're seeing and where you are.

Call Ben Now — 0416 692 022